TL;DR
Utilization rate tells you what percentage of your team's paid hours are going toward billable work. For most service businesses, the healthy range is 65 to 80 percent. Here is how to calculate it and what to do when you are outside that range.
If you run a service business and you are not tracking utilization, you are flying blind on one of your most important levers. You might have a full team, busy-looking calendars, and still be losing money on labor. Or you might be turning away work because you think you are at capacity, when you actually have room.
Utilization rate tells you exactly how much of your team's paid time is going toward billable client work. It is one of the most useful numbers a service business can track.
What utilization rate actually measures
Utilization rate is the percentage of an employee's total available hours that goes toward billable or revenue-generating work. The basic formula is straightforward.
Utilization rate = billable hours divided by total available hours, expressed as a percentage.
If someone works 160 hours in a month and 112 of those hours are billed to clients, their utilization rate is 70%.
Total available hours is typically 160 to 168 hours per month for a full-time employee, depending on working days. Some businesses use slightly different denominators, like target billable hours instead of total hours, but the key is consistency. Pick a definition and use it every month.
What counts as billable and what does not
Billable hours are time you charge to a client or time that directly produces revenue. Non-billable hours are everything else: internal meetings, sales calls, admin, training, and time spent on proposals.
The definition matters because non-billable work is a real cost. If your team spends 30% of their time on non-billable activities, you are effectively paying for 30% of their time without generating revenue from it. That cost has to be covered somewhere, either by higher rates on the 70% that is billed or by cutting the non-billable load.
Tracking utilization forces you to make that cost visible. A lot of owners know, roughly, that their team is busy. They do not know how much of that busyness is actually making money.
What owners get wrong, and why it costs money
The most common mistake is not tracking non-billable hours at all. When employees only log time against client projects, you have no view of what the rest of their time is going toward. You assume they are busy with client work when they might be spending 15 hours a month in internal meetings that could be cut or streamlined.
The second mistake is using utilization to set targets without understanding what a realistic rate looks like. Pushing everyone to 90% utilization sounds efficient. In practice, a team running at 90% has no buffer for onboarding, training, or unexpected client requests. Burnout follows. Turnover follows burnout.
Consider a marketing agency with four staff, each paid for 160 hours per month. If the team is running at 55% utilization on average, that means only 88 hours per person per month is going to client work. The other 72 hours per person, totaling 288 hours across the team, is non-billable overhead. At an average billing rate of $100 per hour, that represents $28,800 per month in labor cost that is not generating direct revenue. Understanding that number changes how you look at your pricing, your team structure, and how you schedule internal meetings.
What a healthy utilization target looks like
For most professional service businesses, a healthy individual utilization rate falls between 65% and 80%. Here is how to think about the range.
Below 60%: You are likely overstaffed for your current revenue, or there is a significant amount of non-billable work that could be reduced or priced differently.
60% to 75%: Healthy for most businesses. There is enough buffer for non-client work and for team members to develop without burning out.
75% to 85%: High utilization. This is sustainable if your non-billable work is genuinely minimal, but watch for signs of strain.
Above 85%: Warning zone. You likely have capacity constraints that are affecting quality or turnaround time, and you may need to hire or raise rates.
Owners and principals tend to run lower utilization than delivery staff because more of their time goes toward sales, operations, and management. That is expected. The benchmark matters most for your delivery team.
What to do about it
- Start tracking all hours, not just client hours. Your team needs to log time against internal categories like business development, admin, and training, as well as client projects. You cannot measure utilization without full time data.
- Calculate utilization monthly by person, not just as a team average. A team average of 70% can hide one person at 90% and another at 50%. The person at 90% is a retention risk. The person at 50% needs a closer look.
- Set a target range, not a single number. A range of 65% to 80% gives your team room to breathe while keeping non-billable time in check. Adjust based on your business model.
- Review non-billable categories regularly. Internal meetings, proposal work, and admin can expand quietly over time. A quarterly review of where non-billable hours are going often surfaces quick wins.
- Connect utilization to your hiring decisions. Before you hire, check your utilization. If your team is at 65% and you have room to reduce non-billable work or close more revenue, hiring is premature. If utilization has been above 80% for three consecutive months, the business case for a hire is strong.
Utilization rate is not just a staffing metric. It tells you how efficiently your labor cost is being converted into revenue. Once you start tracking it, you will use it every month.
If you want help setting up utilization tracking and connecting it to your financial model, book a free call at peterxiacpa.com/book.
Next step: run your numbers through the free CFO scorecard.
Frequently Asked Questions
- What is a good utilization rate for a service business?
- For most professional service businesses, a utilization rate of 65% to 80% is healthy. Below 60% often signals overstaffing or too much non-billable overhead. Above 85% for extended periods is a warning sign of capacity strain.
- How do I calculate utilization rate?
- Divide billable hours by total available hours and multiply by 100. If someone works 160 hours in a month and bills 112 of them to clients, their utilization rate is 70%. Pick a consistent definition of available hours and stick with it.
- What should I do if my team's utilization is low?
- Start by categorizing non-billable time to see where it is going. Internal meetings, admin, and proposal work are often places to reduce load. If non-billable time looks reasonable but utilization is still low, the issue may be insufficient revenue to fill your team's capacity.
Get weekly CFO insights
No fluff. Real finance strategy for Canadian business owners. Unsubscribe any time.
Related Articles
Input Tax Credits Explained: How to Claim the GST/HST You Pay on Expenses
Input tax credits let GST/HST-registered businesses recover the sales tax they pay on eligible expenses. Most owners either under-claim because records are poor or over-claim by including personal expenses. Here is how the system works and what documentation CRA expects.
5 min read
How Often Should You Review Your Revenue Forecast Against Actuals?
Building a revenue forecast is only half the job. The other half is reviewing it against actuals on a schedule tight enough that you can still change the outcome. Here is the cadence that works.
5 min read
When Should You Set Your Annual Budget, and How Often to Revisit It
Budgets built in January are already behind. Starting in October and revising quarterly turns a one-time document into a tool you actually use. The process does not need to be complicated to be effective.
5 min readNeed financial strategy for your business? Explore our CFO services or book a call.